The MVA series are single-stage, centrifugal, suction, monoblock pumps where the impeller and pump share the same shaft.
Main dimensions and rated parameters conform to EN 733
Suction and discharge flanges comply with ISO 7005-2/PN 16.
MV pumps are directly connected with electric motors which comply with VDI and IEC standards. Due to special modular design, the motor, sealing cover and impeller can be removed without the need to dismantle the volute casing.
The MVAe, MVBe and MVCe monoblock pumps are lighter and smaller when compared to the normal centrifugal pumps of similar hydraulic performance.
Main dimensions and rated parameters conform to EN 733
Suction and discharge flanges comply with ISO 7005-2/PN 16.
MV pumps are directly connected with electric motors which comply with VDI and IEC standards. Due to special modular design, the motor, sealing cover and impeller can be removed without the need to dismantle the volute casing.
The MVAe, MVBe and MVCe monoblock pumps are lighter and smaller when compared to the normal centrifugal pumps of similar hydraulic performance.
Application:
- water supply systems and water mains,
- pressure boosting systems
- boiler feedwater systems and condensing boiler systems
- air-conditioning, central heating and water circulation systems
- industry
- fire-fighting systems
TECHNICAL DATA
| Capacity | up to 500m3/h |
| Delivery head | up to 95m |
| Working pressure | 10 bar (16 bar) |
| Temperature of pumped liquid | -10oC ÷ 110oC |
| Suction flange | DN 50 ... DN 200 mm |
| Shaft seal | Mechanical seal |
| R.P.M. | MVAe - 3000rpm MVBe - 1500rpm MVCe - 1000rpm |
| Discharge flange | DN 32 ... DN 150 mm |
OPERATION AREA
Hydro-Vacuum S.A. Pump Selection Progam.
Quick and simple online tool for pump selection based on set criteria.Thanks to the PDP, by means of the "Hydraulic Selection" function, specific pumps can be selected by configuring, among other things, the area of application, pump type, pump design, medium to be pumped, operating point, etc. Alternatively, by using the "Product Catalogue", you can conveniently browse through the pump catalogue which is Hydro-Vacuum S.A. 's production offer.
The result of the selection is a data sheet for the pump containing all the necessary hydraulic (characteristics), electrical, material, construction, dimensional, etc. data.
The first thing to do is to register a new account. After entering some necessary data and approving the form, an activation link will be sent to the e-mail address provided. After clicking on the link, you will be able to make full use of the Hydro-Vacuum S.A. Pump Selection Software.
We encourage you to create an account and try our program.
Technical assistance in the operation of the program tel. 56 45 07 545 (working days 7:00-15:00)
Sklep internetowy
Wybrane produkty zakupisz w naszym sklepie internetowym.Transport gratis dla zamówień powyżej 3000zł brutto.
Szybkie i wygodne zakupy!
