SA and SB pumps can be used in:
Technical specifications
Features:
Design
S pumps consist of: bearing housings, shaft, suction and discharge housings in which shaft seals are installed. On the shaft impellers are mounted, their number depends upon the number of pump stages. Impeller positions are limited by limiting members. Suction member is located on conversions suction housing and discharge member. SB.80 pumps differ from their basic SA.80 execution in the use of one ball bearing at the suction side and a special internal slide bearing at the discharge side. Moreover, front seal is used in place of cord seal. Such a pump design ensures its long life.OPERATION AREA
Hydro-Vacuum S.A. Pump Selection Progam.
Quick and simple online tool for pump selection based on set criteria.Pump related products
Replacement of old pump types with new ones
Old type | New replacement | ||||
Type | Capacity [l/min] |
Delivery head [m] |
Type | Capacity [l/min] |
Delivery head [m] |
S-21 | 20-50 | 24-6 | SK.3.01 | 17-58 | 42-5 |
S-22 | 20-50 | 46-11 | SK.3.02 | 17-58 | 70-10 |
S-23 | 20-50 | 64-16 | SK.3.03 | 17-58 | 94-12 |
S-24 | 20-50 | 85-20 | SK.3.04 | 17-58 | 123-14 |
S-25 | 20-50 | 104-28 | SK.3.05 | 17-58 | 147-16 |
S-26 | 20-50 | 122-33 | SK.3.06 | 17-58 | 169-16 |
S-31 | 30-80 | 20-5,5 | SK.4.01 | 30-75 | 30-85 |
S-32 | 30-80 | 47-10 | SK.4.02 | 30-75 | 62-16 |
S-33 | 30-80 | 70-15 | SK.4.03 | 30-75 | 90-23 |
S-34 | 30-80 | 92-20 | SK.4.04 | 30-75 | 112-29 |
S-35 | 30-80 | 115-25 | SK.4.05 | 30-75 | 135-34 |
S-36 | 30-80 | 140-51 | SK.4.06 | 30-75 | 159-40 |
S-41 | 60-175 | 41-16 | SK.5.01 | 58-125 | 44-12 |
S-41 | 60-175 | 41-16 | SK.6.01 | 100-200 | 35-12 |
S-42 | 60-175 | 70-28 | SK.5.02 | 58-125 | 86-19 |
S-42 | 60-175 | 70-28 | SK.6.02 | 100-200 | 71-20 |
S-43 | 60-175 | 112-42 | SK.5.03 | 58-125 | 124-27 |
S-43 | 60-175 | 112-42 | SK.6.03 | 100-200 | 101-26 |
S-44 | 60-175 | 142-54 | SK.5.04 | 58-125 | 162-35 |
S-44 | 60-175 | 142-54 | SK.6.04 | 100-200 | 130-34 |
S-45 | 60-175 | 184-63 | SK.5.05 | 58-125 | 194-41 |
S-45 | 60-175 | 184-63 | SK.6.05 | 100-200 | 163-41 |
S-46 | 60-175 | 211-73 | SK.5.06 | 58-125 | 227-48 |
S-46 | 60-175 | 211-73 | SK.6.06 | 100-200 | 192-47 |
S-81 | 200-650 | 34-8 | SA.80.01 | 200-650 | 34-8 |
S-82 | 200-650 | 66-16 | SA.80.02 | 200-650 | 66-16 |
S-83 | 200-650 | 97-25 | SA.80.03 | 200-650 | 97-25 |